Understanding the Terminology of EGL Loose Diamonds Appraisals

When you submit your diamonds to the EGL, theTollowsky's cut. This cut reflects the light to allow
European Gemological Society, for appraisal youthe diamond to show the maximum amount of
will receive a comprehensive report about everybrilliance.
detail of the stone. The laboratories, which areThe measurement across the top of the stone is
located in major cities of the world, appraise onlyknown as the diamond table. This is another
loose stones, which is why the term EGL looseimportant aspect of EGL loose diamonds. The
diamonds is often used to describe stones thatbrilliance of the diamond is also influenced by this;
have been appraised by these facilities. Unlike IGIin the amount of sparkle you see when you
appraisals, the facilities will not grade or appraisemove the diamond, especially when it is set in a
any diamonds that have already been set inring. A diamond with a small table will not have the
jewelry without removing the stones first.fire and brilliance of one that has a large table,
In order to insure your diamond and make sureeven though the smaller stone may be more
that you have best value diamonds it is essentialexpensive.
that you have an appraisal report. InsuranceWhen you want to buy EGL loose diamonds it is
companies do require this document in order toimportant to become familiar with the terminology
sell you a policy. You will also find out if you gotrelated to the facets. The Round Brilliant Cut is a
the best value diamonds. You can get a refundvery common diamond cut and has 58 facets.
with money back guarantee diamonds if the IGIThis cut is just one example in which several
appraisals come back with less than the price youdifferent terms apply, which are:o Table facet: this
paid.is the top of the diamond and should be octagon
The report of your EGL loose diamonds will giveshapedo Star facets: these are below the table
you a diagram of the stone with an easy to readfacet and have eight points like a staro Kite or
explanation. In grading the stones, the gemologistsBezel facets: these extend downwards from the
look at the depth of the diamond. This can varytable facet and have four sides shaped like a
according to the way in which the diamond is cut.kiteo Girdle facets: these are attached to the kite
The depth can give the illusion of the diamondfacets and the girdle of the diamond. There are
being larger than it actually is and can determineboth upper and lower girdle facets.o Pavilion
the amount of light it reflects on the facets offacets: they are connect on the underside of the
the stone.girdle are located on the bottom of the diamond
If a diamond is too shallow, it will not reflect veryThe girdle of a non conflict diamond that is graded
much light and will therefore not have the brilliantby EGL loose stones can be of varying sizes
shine that you would like it to have. A diamondfrom very thick to very thin; the girdles of best
with a depth of 59.3% is regarded as being avalue diamonds fall somewhere in the middle of
good diamond with a good depth rating. There arethis range. There are three different types of
many cuts that will give you this depth, butgirdles, but there is really no specific type that will
according to the specialists in grading EGL loosemake one diamond more valuable than another.
diamonds, the best cut is known as the